Find Your Dream Job
Paving, Surfacing, and Tamping Equipment Operators
Operate equipment used for applying concrete, asphalt, or other materials to road beds, parking lots, or airport runways and taxiways or for tamping gravel, dirt, or other materials. Includes concrete and asphalt paving machine operators, form tampers, tamping machine operators, and stone spreader operators.
Also Known As:
Asphalt Paver Operator
Asphalt Paving Machine Operator
Asphalt Raker
Asphalt Roller Operator
Equipment Operator (EO)
Loader Operator
Maintenance Equipment Operator (MEO)
Paver Operator
Roller Operator
Screed Operator
Annual wages for Paving, Surfacing, and Tamping Equipment Operators in Orlando-Kissimmee-Sanford, FL Metro Area
Job Outlook
Average
New job opportunities are likely in the future
Florida's
2034 Projected Employment
3,570
14% Change From 2024
United States
2034 Projected Employment
48,600
3% Change From 2024
Explore Paving, Surfacing, and Tamping Equipment Operators video
Tasks you might complete in a day.
- Light burners or start heating units of machines, and regulate screed temperatures and asphalt flow rates.
- Control traffic.
- Place strips of material, such as cork, asphalt, or steel into joints, or place rolls of expansion-joint material on machines that automatically insert material.
- Cut or break up pavement and drive guardrail posts, using machines equipped with interchangeable hammers.
- Inspect, clean, maintain, and repair equipment, using mechanics' hand tools, or report malfunctions to supervisors.
- Control paving machines to push dump trucks and to maintain a constant flow of asphalt or other material into hoppers or screeds.
- Start machine, engage clutch, and push and move levers to guide machine along forms or guidelines and to control the operation of machine attachments.
- Operate oil distributors, loaders, chip spreaders, dump trucks, and snow plows.
- Drive and operate curbing machines to extrude concrete or asphalt curbing.
- Operate machines that clean or cut expansion joints in concrete or asphalt and that rout out cracks in pavement.
- Operate oil distributors, loaders, chip spreaders, dump trucks, and snow plows.
- Set up and tear down equipment.
- Install dies, cutters, and extensions to screeds onto machines, using hand tools.
- Operate machines that clean or cut expansion joints in concrete or asphalt and that rout out cracks in pavement.
- Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds.
- Cut or break up pavement and drive guardrail posts, using machines equipped with interchangeable hammers.
- Coordinate truck dumping.
- Drive machines onto truck trailers, and drive trucks to transport machines and material to and from job sites.
- Set up and tear down equipment.
- Inspect, clean, maintain, and repair equipment, using mechanics' hand tools, or report malfunctions to supervisors.
- Inspect, clean, maintain, and repair equipment, using mechanics' hand tools, or report malfunctions to supervisors.
- Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds.
- Shovel blacktop.
- Place strips of material, such as cork, asphalt, or steel into joints, or place rolls of expansion-joint material on machines that automatically insert material.
- Fill tanks, hoppers, or machines with paving materials.
- Set up forms and lay out guidelines for curbs, according to written specifications, using string, spray paint, and concrete or water mixes.
- Set up forms and lay out guidelines for curbs, according to written specifications, using string, spray paint, and concrete or water mixes.
- Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications.
- Observe distribution of paving material to adjust machine settings or material flow, and indicate low spots for workers to add material.
- Observe distribution of paving material to adjust machine settings or material flow, and indicate low spots for workers to add material.
Subject areas you may need to master.
- Personnel and Human Resources - Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.
- Biology - Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.
- Psychology - Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.
- Geography - Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.
- Fine Arts - Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.
- History and Archeology - Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.
- Philosophy and Theology - Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.
- Public Safety and Security - Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
- Building and Construction - Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
- Law and Government - Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.
- Communications and Media - Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.
- Administrative - Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.
- Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
- Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
- Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
- English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, and rules of composition and grammar.
- Telecommunications - Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.
- Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
- Design - Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
- Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
- Economics and Accounting - Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.
- Sales and Marketing - Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.
- Food Production - Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.
- Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
- Physics - Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.
- Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
- Sociology and Anthropology - Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.
- Medicine and Dentistry - Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.
- Therapy and Counseling - Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.
- Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
- Foreign Language - Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.
- Transportation - Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.
- Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Strengths you may need in this role.
- Negotiation - Bringing people together to solve differences.
- Installation - Installing equipment, machines, wiring, or computer programs.
- Social Perceptiveness - Understanding people's reactions.
- Operation and Control - Using equipment or systems.
- Instructing - Teaching people how to do something.
- Quality Control Analysis - Testing how well a product or service works.
- Judgment and Decision Making - Thinking about the pros and cons of different options and picking the best one.
- Coordination - Changing what is done based on other people's actions.
- Management of Financial Resources - Making spending decisions and keeping track of what is spent.
- Persuasion - Talking people into changing their minds or their behavior.
- Equipment Selection - Deciding what kind of tools and equipment are needed to do a job.
- Troubleshooting - Figuring out what is causing equipment, machines, wiring, or computer programs to not work.
- Management of Material Resources - Managing equipment and materials.
- Active Listening - Listening to others, not interrupting, and asking good questions.
- Service Orientation - Looking for ways to help people.
- Operations Monitoring - Watching gauges, dials, or display screens to make sure a machine is working.
- Systems Analysis - Figuring out how a system should work and how changes in the future will affect it.
- Operations Analysis - Figuring out what a product or service needs to be able to do.
- Time Management - Managing your time and the time of other people.
- Monitoring - Keeping track of how well people and/or groups are doing in order to make improvements.
- Complex Problem Solving - Noticing a problem and figuring out the best way to solve it.
- Reading Comprehension - Reading work-related information.
- Active Learning - Figuring out how to use new ideas or things.
- Mathematics - Using math to solve problems.
- Writing - Writing things for co-workers or customers.
- Repairing - Repairing machines or systems using the right tools.
- Programming - Writing computer programs.
- Critical Thinking - Thinking about the pros and cons of different ways to solve a problem.
- Learning Strategies - Using the best training or teaching strategies for learning new things.
- Systems Evaluation - Measuring how well a system is working and how to improve it.
- Technology Design - Making equipment and technology useful for customers.
- Equipment Maintenance - Planning and doing the basic maintenance on equipment.
- Speaking - Talking to others.
- Science - Using scientific rules and strategies to solve problems.
- Management of Personnel Resources - Selecting and managing the best workers for a job.
- Oral Expression - Communicating by speaking.
- Written Expression - Communicating by writing.
- Perceptual Speed - Quickly comparing groups of letters, numbers, pictures, or other things.
- Deductive Reasoning - Using rules to solve problems.
- Selective Attention - Paying attention to something without being distracted.
- Auditory Attention - Paying attention to one sound while there are other distracting sounds.
- Oral Comprehension - Listening and understanding what people say.
- Visualization - Imagining how something will look after it is moved around or changed.
- Problem Sensitivity - Noticing when problems happen.
- Time Sharing - Doing two or more things at the same time.
- Peripheral Vision - Seeing something to your side when your are looking ahead.
- Depth Perception - Deciding which thing is closer or farther away from you, or deciding how far away it is from you.
- Multilimb Coordination - Using your arms and/or legs together while sitting, standing, or lying down.
- Dynamic Strength - Exercising for a long time without your muscles getting tired.
- Speed of Limb Movement - Quickly moving your arms and legs.
- Gross Body Coordination - Moving your arms, legs, and mid-section together while your whole body is moving.
- Gross Body Equilibrium - Keeping your balance or staying upright.
- Glare Sensitivity - Seeing something even if there is a glare or very bright light.
- Extent Flexibility - Bending, stretching, twisting, or reaching with your body, arms, and/or legs.
- Inductive Reasoning - Making general rules or coming up with answers from lots of detailed information.
- Flexibility of Closure - Seeing hidden patterns.
- Category Flexibility - Grouping things in different ways.
- Memorization - Remembering words, numbers, pictures, or steps.
- Speech Clarity - Speaking clearly.
- Finger Dexterity - Putting together small parts with your fingers.
- Stamina - Exercising for a long time without getting out of breath.
- Far Vision - Seeing details that are far away.
- Information Ordering - Ordering or arranging things.
- Mathematical Reasoning - Choosing the right type of math to solve a problem.
- Night Vision - Seeing at night or under low light.
- Visual Color Discrimination - Noticing the difference between colors, including shades and brightness.
- Wrist-Finger Speed - Making fast, simple, repeated movements of your fingers, hands, and wrists.
- Dynamic Flexibility - Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.
- Manual Dexterity - Holding or moving items with your hands.
- Near Vision - Seeing details up close.
- Hearing Sensitivity - Telling the difference between sounds.
- Fluency of Ideas - Coming up with lots of ideas.
- Originality - Creating new and original ideas.
- Number Facility - Adding, subtracting, multiplying, or dividing.
- Control Precision - Quickly changing the controls of a machine, car, truck or boat.
- Sound Localization - Noticing the direction that a sound came from.
- Arm-Hand Steadiness - Keeping your arm or hand steady.
- Explosive Strength - Jumping, sprinting, or throwing something.
- Response Orientation - Quickly deciding if you should move your hand, foot, or other body part.
- Rate Control - Changing when and how fast you move based on how something else is moving.
- Speed of Closure - Quickly knowing what you are looking at.
- Spatial Orientation - Knowing where things are around you.
- Reaction Time - Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.
- Written Comprehension - Reading and understanding what is written.
- Speech Recognition - Recognizing spoken words.
- Static Strength - Lifting, pushing, pulling, or carrying.
- Trunk Strength - Using your lower back and stomach.
Average Education Attained
Highest level of education earned by people in this career.
Career Coaching
Need a guide to help you on your career journey or to prepare for your next interview?
You May Also Be Interested In
Content sourced from United States Department of Labor Employment and Training Administration ("DOLETA") and the Minnesota Department of Employment & Economic Development ("DEED")